Configuration

en
cont f
  # 1. 追蹤介面
  track 1 interface loopback 0 line-protocol
  exit

  # 2. 設定EEM
  event manager applet Enable_Lo0
  event track 1 state down
  action 1.0 cli command "en"
  action 2.0 cli command "conf t"
  action 3.0 cli command "int loopback 0"
  action 4.0 cli command "no shut"
  action 5.0 cli command "end"
  end

wr

Check

# 檢查設定
show event manager policy registered

# debug
debug event manager action cli